This is the latest recevied telemetry packets stored in our database for station/object CT2IKC-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1754368405 | 337 Count | 467 Count | 259 Count | 0 VDC | 0 VDC |
| 1754366601 | 332 Count | 462 Count | 255 Count | 0 VDC | 0 VDC |
| 1754364798 | 327 Count | 457 Count | 251 Count | 0 VDC | 0 VDC |
| 1754363037 | 322 Count | 452 Count | 247 Count | 0 VDC | 0 VDC |
| 1754361233 | 317 Count | 447 Count | 243 Count | 0 VDC | 0 VDC |
| 1754343198 | 268 Count | 397 Count | 204 Count | 0 VDC | 0 VDC |
| 1754341435 | 265 Count | 392 Count | 202 Count | 0 VDC | 0 VDC |
| 1754339632 | 262 Count | 387 Count | 200 Count | 0 VDC | 0 VDC |
| 1754337828 | 258 Count | 382 Count | 197 Count | 0 VDC | 0 VDC |
| 1754336025 | 254 Count | 377 Count | 194 Count | 0 VDC | 0 VDC |
| 1754332418 | 246 Count | 367 Count | 188 Count | 0 VDC | 0 VDC |
| 1754328810 | 237 Count | 352 Count | 181 Count | 0 VDC | 0 VDC |
| 1754327007 | 229 Count | 330 Count | 174 Count | 0 VDC | 0 VDC |
| 1754325203 | 223 Count | 319 Count | 169 Count | 0 VDC | 0 VDC |
| 1754323400 | 220 Count | 314 Count | 167 Count | 0 VDC | 0 VDC |
| 1754321596 | 217 Count | 309 Count | 165 Count | 0 VDC | 0 VDC |
| 1754319838 | 214 Count | 304 Count | 163 Count | 0 VDC | 0 VDC |
| 1754318034 | 211 Count | 299 Count | 161 Count | 0 VDC | 0 VDC |
| 1754316231 | 208 Count | 294 Count | 159 Count | 0 VDC | 0 VDC |
| 1754314427 | 205 Count | 289 Count | 157 Count | 0 VDC | 0 VDC |
| 1754312624 | 202 Count | 284 Count | 155 Count | 0 VDC | 0 VDC |
| 1754310820 | 199 Count | 279 Count | 153 Count | 0 VDC | 0 VDC |
| 1754309016 | 196 Count | 274 Count | 151 Count | 0 VDC | 0 VDC |
| 1754307213 | 193 Count | 269 Count | 149 Count | 0 VDC | 0 VDC |
| 1754305409 | 190 Count | 264 Count | 147 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)