This is the latest recevied telemetry packets stored in our database for station/object SQ3MQD-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1758097645 | 822 Count | 206 Count | 0 Count | 0 VDC | 0 VDC |
| 1758096744 | 821 Count | 206 Count | 0 Count | 0 VDC | 0 VDC |
| 1758095844 | 820 Count | 206 Count | 0 Count | 0 VDC | 0 VDC |
| 1758094943 | 819 Count | 206 Count | 0 Count | 0 VDC | 0 VDC |
| 1758094042 | 818 Count | 206 Count | 0 Count | 0 VDC | 0 VDC |
| 1758093142 | 817 Count | 206 Count | 0 Count | 0 VDC | 0 VDC |
| 1758092241 | 816 Count | 206 Count | 0 Count | 0 VDC | 0 VDC |
| 1758091340 | 815 Count | 206 Count | 0 Count | 0 VDC | 0 VDC |
| 1758090439 | 814 Count | 206 Count | 0 Count | 0 VDC | 0 VDC |
| 1758089539 | 813 Count | 206 Count | 0 Count | 0 VDC | 0 VDC |
| 1758088638 | 812 Count | 206 Count | 0 Count | 0 VDC | 0 VDC |
| 1758087737 | 811 Count | 206 Count | 0 Count | 0 VDC | 0 VDC |
| 1758086837 | 810 Count | 206 Count | 0 Count | 0 VDC | 0 VDC |
| 1758085936 | 809 Count | 206 Count | 0 Count | 0 VDC | 0 VDC |
| 1758085035 | 808 Count | 206 Count | 0 Count | 0 VDC | 0 VDC |
| 1758084134 | 807 Count | 206 Count | 0 Count | 0 VDC | 0 VDC |
| 1758083234 | 806 Count | 206 Count | 0 Count | 0 VDC | 0 VDC |
| 1758082333 | 805 Count | 206 Count | 0 Count | 0 VDC | 0 VDC |
| 1758081432 | 804 Count | 206 Count | 0 Count | 0 VDC | 0 VDC |
| 1758080531 | 803 Count | 206 Count | 0 Count | 0 VDC | 0 VDC |
| 1758079631 | 802 Count | 206 Count | 0 Count | 0 VDC | 0 VDC |
| 1758078730 | 801 Count | 206 Count | 0 Count | 0 VDC | 0 VDC |
| 1758077829 | 800 Count | 206 Count | 0 Count | 0 VDC | 0 VDC |
| 1758076046 | 798 Count | 206 Count | 0 Count | 0 VDC | 0 VDC |
| 1758058032 | 778 Count | 206 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)