This is the latest recevied telemetry packets stored in our database for station/object SP9DAT-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1754245115 | 341 Count | 404 Count | 158 Count | 4.01 VDC | 0 VDC |
| 1754244214 | 339 Count | 401 Count | 157 Count | 4.02 VDC | 0 VDC |
| 1754242412 | 317 Count | 378 Count | 137 Count | 4.02 VDC | 0 VDC |
| 1754241511 | 316 Count | 378 Count | 137 Count | 4.02 VDC | 0 VDC |
| 1754240610 | 315 Count | 378 Count | 137 Count | 4.02 VDC | 0 VDC |
| 1754239710 | 314 Count | 378 Count | 137 Count | 4.02 VDC | 0 VDC |
| 1754237908 | 310 Count | 376 Count | 135 Count | 4.02 VDC | 0 VDC |
| 1754237007 | 308 Count | 375 Count | 134 Count | 4.02 VDC | 0 VDC |
| 1754235206 | 305 Count | 373 Count | 133 Count | 4.02 VDC | 0 VDC |
| 1754234305 | 304 Count | 373 Count | 133 Count | 4.02 VDC | 0 VDC |
| 1754233404 | 303 Count | 373 Count | 133 Count | 4.02 VDC | 0 VDC |
| 1754232503 | 301 Count | 372 Count | 132 Count | 4.02 VDC | 0 VDC |
| 1754231602 | 297 Count | 369 Count | 129 Count | 4.02 VDC | 0 VDC |
| 1754230701 | 295 Count | 368 Count | 128 Count | 4.02 VDC | 0 VDC |
| 1754228900 | 291 Count | 365 Count | 126 Count | 4.02 VDC | 0 VDC |
| 1754227999 | 289 Count | 364 Count | 125 Count | 4.02 VDC | 0 VDC |
| 1754227098 | 287 Count | 363 Count | 124 Count | 4.02 VDC | 0 VDC |
| 1754226197 | 286 Count | 363 Count | 124 Count | 4.02 VDC | 0 VDC |
| 1754225297 | 284 Count | 358 Count | 123 Count | 4.02 VDC | 0 VDC |
| 1754224396 | 283 Count | 358 Count | 123 Count | 4.02 VDC | 0 VDC |
| 1754223495 | 281 Count | 355 Count | 122 Count | 4.02 VDC | 0 VDC |
| 1754222594 | 280 Count | 354 Count | 122 Count | 4.02 VDC | 0 VDC |
| 1754220792 | 276 Count | 351 Count | 120 Count | 4.02 VDC | 0 VDC |
| 1754219892 | 275 Count | 343 Count | 120 Count | 4.02 VDC | 0 VDC |
| 1754218991 | 273 Count | 338 Count | 119 Count | 4.02 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)