This is the latest recevied telemetry packets stored in our database for station/object SQ9SIM-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1791573637 | 953 Count | 483 Count | 387 Count | 0 VDC | 0 VDC |
| 1791566434 | 949 Count | 483 Count | 387 Count | 0 VDC | 0 VDC |
| 1791559231 | 945 Count | 483 Count | 387 Count | 0 VDC | 0 VDC |
| 1791541223 | 925 Count | 473 Count | 377 Count | 0 VDC | 0 VDC |
| 1791537639 | 919 Count | 469 Count | 373 Count | 0 VDC | 0 VDC |
| 1791534038 | 912 Count | 464 Count | 368 Count | 0 VDC | 0 VDC |
| 1791530436 | 906 Count | 460 Count | 364 Count | 0 VDC | 0 VDC |
| 1791526834 | 890 Count | 446 Count | 350 Count | 0 VDC | 0 VDC |
| 1791523233 | 866 Count | 424 Count | 328 Count | 0 VDC | 0 VDC |
| 1791519631 | 853 Count | 413 Count | 317 Count | 0 VDC | 0 VDC |
| 1791516030 | 851 Count | 413 Count | 317 Count | 0 VDC | 0 VDC |
| 1791512428 | 849 Count | 413 Count | 317 Count | 0 VDC | 0 VDC |
| 1791508826 | 847 Count | 413 Count | 317 Count | 0 VDC | 0 VDC |
| 1791505225 | 845 Count | 413 Count | 317 Count | 0 VDC | 0 VDC |
| 1791498022 | 841 Count | 413 Count | 317 Count | 0 VDC | 0 VDC |
| 1791494439 | 839 Count | 413 Count | 317 Count | 0 VDC | 0 VDC |
| 1791490837 | 837 Count | 413 Count | 317 Count | 0 VDC | 0 VDC |
| 1791476431 | 829 Count | 413 Count | 317 Count | 0 VDC | 0 VDC |
| 1791472829 | 827 Count | 413 Count | 317 Count | 0 VDC | 0 VDC |
| 1791469228 | 825 Count | 413 Count | 317 Count | 0 VDC | 0 VDC |
| 1791465626 | 823 Count | 413 Count | 317 Count | 0 VDC | 0 VDC |
| 1791462024 | 811 Count | 403 Count | 307 Count | 0 VDC | 0 VDC |
| 1791458422 | 801 Count | 395 Count | 299 Count | 0 VDC | 0 VDC |
| 1791454821 | 783 Count | 379 Count | 283 Count | 0 VDC | 0 VDC |
| 1791451238 | 774 Count | 372 Count | 276 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)