This is the latest recevied telemetry packets stored in our database for station/object SP2MG-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1747527623 | 100 Count | 328 Count | 81 Count | 4.28 VDC | 0.14 VDC |
| 1747522206 | 61 Count | 219 Count | 48 Count | 4.29 VDC | 0.14 VDC |
| 1747520400 | 51 Count | 190 Count | 40 Count | 4.25 VDC | 0.14 VDC |
| 1747518594 | 43 Count | 159 Count | 34 Count | 4.32 VDC | 0.14 VDC |
| 1747516788 | 35 Count | 125 Count | 28 Count | 4.28 VDC | 0.14 VDC |
| 1747513177 | 18 Count | 62 Count | 15 Count | 4.28 VDC | 0.14 VDC |
| 1747511442 | 10 Count | 34 Count | 9 Count | 4.3 VDC | 0.14 VDC |
| 1747509636 | 274 Count | 1014 Count | 193 Count | 4.28 VDC | 0.14 VDC |
| 1747507830 | 259 Count | 966 Count | 180 Count | 4.25 VDC | 0.14 VDC |
| 1747506024 | 248 Count | 932 Count | 171 Count | 4.3 VDC | 0.14 VDC |
| 1747504218 | 236 Count | 894 Count | 161 Count | 4.24 VDC | 0.14 VDC |
| 1747498800 | 180 Count | 749 Count | 111 Count | 4.32 VDC | 0.14 VDC |
| 1747496995 | 177 Count | 730 Count | 110 Count | 4.31 VDC | 0.14 VDC |
| 1747495189 | 175 Count | 710 Count | 110 Count | 4.33 VDC | 0.14 VDC |
| 1747491577 | 167 Count | 666 Count | 106 Count | 4.26 VDC | 0.14 VDC |
| 1747489841 | 165 Count | 652 Count | 106 Count | 4.25 VDC | 0.14 VDC |
| 1747488035 | 161 Count | 632 Count | 104 Count | 4.34 VDC | 0.14 VDC |
| 1747486229 | 158 Count | 608 Count | 103 Count | 4.3 VDC | 0.14 VDC |
| 1747484423 | 147 Count | 571 Count | 94 Count | 4.29 VDC | 0.14 VDC |
| 1747482617 | 136 Count | 541 Count | 85 Count | 4.28 VDC | 0.14 VDC |
| 1747480812 | 128 Count | 514 Count | 79 Count | 4.26 VDC | 0.14 VDC |
| 1747477200 | 115 Count | 463 Count | 70 Count | 4.24 VDC | 0.14 VDC |
| 1747475394 | 109 Count | 441 Count | 66 Count | 4.27 VDC | 0.14 VDC |
| 1747473588 | 105 Count | 418 Count | 64 Count | 4.29 VDC | 0.14 VDC |
| 1747471782 | 99 Count | 392 Count | 60 Count | 4.24 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)