This is the latest recevied telemetry packets stored in our database for station/object SP6RJ-11. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1762126373 | 923 Count | 0 Count | 0 Count | 4.29 VDC | 0 VDC |
| 1762125772 | 919 Count | 0 Count | 0 Count | 4.31 VDC | 0 VDC |
| 1762125172 | 912 Count | 0 Count | 0 Count | 4.29 VDC | 0 VDC |
| 1762124571 | 904 Count | 0 Count | 0 Count | 4.27 VDC | 0 VDC |
| 1762122770 | 875 Count | 0 Count | 0 Count | 4.34 VDC | 0 VDC |
| 1762122169 | 867 Count | 0 Count | 0 Count | 4.29 VDC | 0 VDC |
| 1762121569 | 828 Count | 0 Count | 0 Count | 4.3 VDC | 0 VDC |
| 1762120969 | 814 Count | 0 Count | 0 Count | 4.26 VDC | 0 VDC |
| 1762120368 | 808 Count | 0 Count | 0 Count | 4.27 VDC | 0 VDC |
| 1762119768 | 804 Count | 0 Count | 0 Count | 4.3 VDC | 0 VDC |
| 1762119168 | 799 Count | 0 Count | 0 Count | 4.26 VDC | 0 VDC |
| 1762118568 | 795 Count | 0 Count | 0 Count | 4.27 VDC | 0 VDC |
| 1762117366 | 782 Count | 0 Count | 0 Count | 4.35 VDC | 0 VDC |
| 1762116765 | 776 Count | 0 Count | 0 Count | 4.33 VDC | 0 VDC |
| 1762105368 | 658 Count | 0 Count | 0 Count | 4.32 VDC | 0 VDC |
| 1762104768 | 654 Count | 0 Count | 0 Count | 4.34 VDC | 0 VDC |
| 1762104167 | 648 Count | 0 Count | 0 Count | 4.31 VDC | 0 VDC |
| 1762102366 | 631 Count | 0 Count | 0 Count | 4.32 VDC | 0 VDC |
| 1762101171 | 618 Count | 0 Count | 0 Count | 4.26 VDC | 0 VDC |
| 1762100571 | 611 Count | 0 Count | 0 Count | 4.3 VDC | 0 VDC |
| 1762099970 | 603 Count | 0 Count | 0 Count | 4.24 VDC | 0 VDC |
| 1762099370 | 595 Count | 0 Count | 0 Count | 4.34 VDC | 0 VDC |
| 1762098770 | 589 Count | 0 Count | 0 Count | 4.31 VDC | 0 VDC |
| 1762098169 | 579 Count | 0 Count | 0 Count | 4.3 VDC | 0 VDC |
| 1762097569 | 552 Count | 0 Count | 0 Count | 4.23 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)