This is the latest recevied telemetry packets stored in our database for station/object W5SMB-9. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1762271581 | 487 Volts | 593 Deg.F | 0 | 0 | 0 |
| 1762271458 | 490 Volts | 588 Deg.F | 0 | 0 | 0 |
| 1762271451 | 463 Volts | 588 Deg.F | 0 | 0 | 0 |
| 1762267289 | 492 Volts | 585 Deg.F | 0 | 0 | 0 |
| 1762267210 | 492 Volts | 582 Deg.F | 0 | 0 | 0 |
| 1762267188 | 484 Volts | 582 Deg.F | 0 | 0 | 0 |
| 1762264268 | 490 Volts | 598 Deg.F | 0 | 0 | 0 |
| 1762264247 | 493 Volts | 597 Deg.F | 0 | 0 | 0 |
| 1762264216 | 492 Volts | 596 Deg.F | 0 | 0 | 0 |
| 1762264173 | 488 Volts | 596 Deg.F | 0 | 0 | 0 |
| 1762264154 | 491 Volts | 596 Deg.F | 0 | 0 | 0 |
| 1762264124 | 493 Volts | 595 Deg.F | 0 | 0 | 0 |
| 1762264094 | 490 Volts | 595 Deg.F | 0 | 0 | 0 |
| 1762264023 | 490 Volts | 593 Deg.F | 0 | 0 | 0 |
| 1762263871 | 487 Volts | 591 Deg.F | 0 | 0 | 0 |
| 1762263723 | 406 Volts | 589 Deg.F | 0 | 0 | 0 |
| 1762263662 | 412 Volts | 588 Deg.F | 0 | 0 | 0 |
| 1762263632 | 417 Volts | 588 Deg.F | 0 | 0 | 0 |
| 1762263601 | 424 Volts | 587 Deg.F | 0 | 0 | 0 |
| 1762263571 | 492 Volts | 586 Deg.F | 0 | 0 | 0 |
| 1762263535 | 496 Volts | 585 Deg.F | 0 | 0 | 0 |
| 1762263504 | 496 Volts | 584 Deg.F | 0 | 0 | 0 |
| 1762263474 | 494 Volts | 582 Deg.F | 0 | 0 | 0 |
| 1762263455 | 493 Volts | 582 Deg.F | 0 | 0 | 0 |
| 1762263425 | 492 Volts | 580 Deg.F | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)