This is the latest recevied telemetry packets stored in our database for station/object SQ2WSZ-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1791592539 | 60 Count | 125 Count | 52 Count | 0 VDC | 0 VDC |
| 1791578747 | 371 Count | 824 Count | 326 Count | 0 VDC | 0 VDC |
| 1791573941 | 288 Count | 649 Count | 251 Count | 0 VDC | 0 VDC |
| 1791570336 | 246 Count | 543 Count | 215 Count | 0 VDC | 0 VDC |
| 1791568534 | 221 Count | 489 Count | 193 Count | 0 VDC | 0 VDC |
| 1791564329 | 130 Count | 307 Count | 109 Count | 0 VDC | 0 VDC |
| 1791562552 | 104 Count | 261 Count | 90 Count | 0 VDC | 0 VDC |
| 1791560750 | 82 Count | 220 Count | 71 Count | 0 VDC | 0 VDC |
| 1791560149 | 65 Count | 193 Count | 55 Count | 0 VDC | 0 VDC |
| 1791555944 | 20 Count | 49 Count | 17 Count | 0 VDC | 0 VDC |
| 1791555343 | 16 Count | 39 Count | 14 Count | 0 VDC | 0 VDC |
| 1791554142 | 2 Count | 10 Count | 2 Count | 0 VDC | 0 VDC |
| 1791552940 | 362 Count | 992 Count | 313 Count | 0 VDC | 0 VDC |
| 1791551739 | 345 Count | 919 Count | 298 Count | 0 VDC | 0 VDC |
| 1791549335 | 281 Count | 659 Count | 238 Count | 0 VDC | 0 VDC |
| 1791548134 | 272 Count | 622 Count | 231 Count | 0 VDC | 0 VDC |
| 1791547533 | 265 Count | 609 Count | 225 Count | 0 VDC | 0 VDC |
| 1791545731 | 223 Count | 533 Count | 186 Count | 0 VDC | 0 VDC |
| 1791543929 | 201 Count | 462 Count | 167 Count | 0 VDC | 0 VDC |
| 1791542126 | 183 Count | 419 Count | 152 Count | 0 VDC | 0 VDC |
| 1791541526 | 179 Count | 409 Count | 149 Count | 0 VDC | 0 VDC |
| 1791540950 | 170 Count | 396 Count | 145 Count | 0 VDC | 0 VDC |
| 1791540349 | 163 Count | 381 Count | 139 Count | 0 VDC | 0 VDC |
| 1791539748 | 158 Count | 367 Count | 135 Count | 0 VDC | 0 VDC |
| 1791536745 | 132 Count | 312 Count | 114 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)