This is the latest recevied telemetry packets stored in our database for station/object SP2WH-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1762238906 | 384 Count | 605 Count | 350 Count | 0 VDC | 0 VDC |
| 1762237105 | 361 Count | 576 Count | 328 Count | 0 VDC | 0 VDC |
| 1762235304 | 340 Count | 548 Count | 308 Count | 0 VDC | 0 VDC |
| 1762233504 | 323 Count | 524 Count | 292 Count | 0 VDC | 0 VDC |
| 1762231703 | 312 Count | 507 Count | 282 Count | 0 VDC | 0 VDC |
| 1762229902 | 308 Count | 504 Count | 279 Count | 0 VDC | 0 VDC |
| 1762228102 | 304 Count | 501 Count | 276 Count | 0 VDC | 0 VDC |
| 1762226301 | 300 Count | 498 Count | 273 Count | 0 VDC | 0 VDC |
| 1762224501 | 296 Count | 495 Count | 270 Count | 0 VDC | 0 VDC |
| 1762222700 | 291 Count | 490 Count | 266 Count | 0 VDC | 0 VDC |
| 1762190316 | 60 Count | 102 Count | 57 Count | 0 VDC | 0 VDC |
| 1762186714 | 32 Count | 63 Count | 31 Count | 0 VDC | 0 VDC |
| 1762179512 | 756 Count | 910 Count | 647 Count | 0 VDC | 0 VDC |
| 1762174110 | 685 Count | 778 Count | 579 Count | 0 VDC | 0 VDC |
| 1762170509 | 630 Count | 653 Count | 526 Count | 0 VDC | 0 VDC |
| 1762168708 | 599 Count | 617 Count | 496 Count | 0 VDC | 0 VDC |
| 1762166907 | 585 Count | 602 Count | 483 Count | 0 VDC | 0 VDC |
| 1762165107 | 558 Count | 569 Count | 457 Count | 0 VDC | 0 VDC |
| 1762163306 | 503 Count | 509 Count | 403 Count | 0 VDC | 0 VDC |
| 1762159705 | 465 Count | 464 Count | 367 Count | 0 VDC | 0 VDC |
| 1762157904 | 463 Count | 463 Count | 366 Count | 0 VDC | 0 VDC |
| 1762156103 | 450 Count | 451 Count | 354 Count | 0 VDC | 0 VDC |
| 1762154303 | 446 Count | 448 Count | 351 Count | 0 VDC | 0 VDC |
| 1762152502 | 437 Count | 440 Count | 343 Count | 0 VDC | 0 VDC |
| 1762150702 | 433 Count | 437 Count | 340 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)