This is the latest recevied telemetry packets stored in our database for station/object SR2LMU-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1754286530 | 3 Count | 915 Count | 0 Count | 2.85 VDC | 0 VDC |
| 1754282930 | 3 Count | 889 Count | 0 Count | 2.94 VDC | 0 VDC |
| 1754279330 | 3 Count | 880 Count | 0 Count | 3.07 VDC | 0 VDC |
| 1754275729 | 3 Count | 872 Count | 0 Count | 2.92 VDC | 0 VDC |
| 1754272129 | 3 Count | 864 Count | 0 Count | 3.01 VDC | 0 VDC |
| 1754268528 | 3 Count | 855 Count | 0 Count | 2.91 VDC | 0 VDC |
| 1754239727 | 3 Count | 774 Count | 0 Count | 2.86 VDC | 0 VDC |
| 1754236127 | 3 Count | 763 Count | 0 Count | 2.92 VDC | 0 VDC |
| 1754232527 | 3 Count | 753 Count | 0 Count | 2.96 VDC | 0 VDC |
| 1754228927 | 3 Count | 738 Count | 0 Count | 2.88 VDC | 0 VDC |
| 1754225327 | 3 Count | 729 Count | 0 Count | 2.93 VDC | 0 VDC |
| 1754221727 | 3 Count | 721 Count | 0 Count | 3.02 VDC | 0 VDC |
| 1754218128 | 3 Count | 712 Count | 0 Count | 3.04 VDC | 0 VDC |
| 1754214528 | 3 Count | 704 Count | 0 Count | 2.93 VDC | 0 VDC |
| 1754210928 | 3 Count | 690 Count | 0 Count | 2.98 VDC | 0 VDC |
| 1754207327 | 3 Count | 681 Count | 0 Count | 3.01 VDC | 0 VDC |
| 1754203727 | 3 Count | 673 Count | 0 Count | 3 VDC | 0 VDC |
| 1754200127 | 3 Count | 664 Count | 0 Count | 3.01 VDC | 0 VDC |
| 1754196527 | 3 Count | 655 Count | 0 Count | 2.97 VDC | 0 VDC |
| 1754192927 | 3 Count | 646 Count | 0 Count | 2.93 VDC | 0 VDC |
| 1754189327 | 3 Count | 635 Count | 0 Count | 3 VDC | 0 VDC |
| 1754185726 | 3 Count | 622 Count | 0 Count | 3.01 VDC | 0 VDC |
| 1754182126 | 3 Count | 608 Count | 0 Count | 2.95 VDC | 0 VDC |
| 1754174926 | 3 Count | 587 Count | 0 Count | 3.05 VDC | 0 VDC |
| 1754171326 | 3 Count | 578 Count | 0 Count | 2.98 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)