This is the latest recevied telemetry packets stored in our database for station/object SR2ZYT-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1742268540 | 286 Count | 450 Count | 210 Count | 4.17 VDC | 0 VDC |
| 1742266741 | 281 Count | 442 Count | 206 Count | 4.17 VDC | 0 VDC |
| 1742264942 | 276 Count | 432 Count | 202 Count | 4.17 VDC | 0 VDC |
| 1742263142 | 271 Count | 421 Count | 198 Count | 4.17 VDC | 0 VDC |
| 1742261343 | 266 Count | 410 Count | 194 Count | 4.17 VDC | 0 VDC |
| 1742259544 | 261 Count | 400 Count | 190 Count | 4.17 VDC | 0 VDC |
| 1742250550 | 236 Count | 348 Count | 170 Count | 4.18 VDC | 0 VDC |
| 1742246953 | 226 Count | 329 Count | 162 Count | 4.18 VDC | 0 VDC |
| 1742243354 | 216 Count | 309 Count | 154 Count | 4.19 VDC | 0 VDC |
| 1742239755 | 206 Count | 289 Count | 146 Count | 4.19 VDC | 0 VDC |
| 1742236158 | 196 Count | 268 Count | 138 Count | 4.19 VDC | 0 VDC |
| 1742232560 | 186 Count | 248 Count | 130 Count | 4.2 VDC | 0 VDC |
| 1742230760 | 181 Count | 239 Count | 126 Count | 4.2 VDC | 0.98 VDC |
| 1742228962 | 176 Count | 230 Count | 122 Count | 4.21 VDC | 5.5 VDC |
| 1742227163 | 171 Count | 221 Count | 118 Count | 4.21 VDC | 5.52 VDC |
| 1742225365 | 166 Count | 211 Count | 114 Count | 4.21 VDC | 5.52 VDC |
| 1742223566 | 161 Count | 201 Count | 110 Count | 4.21 VDC | 5.52 VDC |
| 1742221768 | 156 Count | 191 Count | 106 Count | 4.22 VDC | 5.52 VDC |
| 1742219969 | 153 Count | 186 Count | 104 Count | 4.19 VDC | 5.52 VDC |
| 1742218168 | 149 Count | 177 Count | 101 Count | 4.17 VDC | 5.5 VDC |
| 1742216370 | 144 Count | 167 Count | 97 Count | 4.17 VDC | 5.5 VDC |
| 1742214570 | 139 Count | 157 Count | 93 Count | 4.17 VDC | 5.5 VDC |
| 1742212771 | 134 Count | 147 Count | 89 Count | 4.17 VDC | 5.5 VDC |
| 1742210973 | 130 Count | 139 Count | 86 Count | 4.17 VDC | 5.5 VDC |
| 1742209174 | 125 Count | 131 Count | 82 Count | 4.17 VDC | 5.5 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)