This is the latest recevied telemetry packets stored in our database for station/object 3Z2T-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1758172465 | 104 Count | 561 Count | 0 Count | 408 VDC | 219 VDC |
| 1758170666 | 102 Count | 545 Count | 0 Count | 408 VDC | 187 VDC |
| 1758168867 | 100 Count | 536 Count | 0 Count | 408 VDC | 62 VDC |
| 1758167066 | 98 Count | 526 Count | 0 Count | 408 VDC | 50 VDC |
| 1758165266 | 96 Count | 517 Count | 0 Count | 408 VDC | 50 VDC |
| 1758140074 | 68 Count | 401 Count | 0 Count | 409 VDC | 50 VDC |
| 1758138275 | 66 Count | 395 Count | 0 Count | 410 VDC | 50 VDC |
| 1758136476 | 64 Count | 385 Count | 0 Count | 410 VDC | 50 VDC |
| 1758134676 | 62 Count | 380 Count | 0 Count | 410 VDC | 50 VDC |
| 1758132876 | 60 Count | 373 Count | 0 Count | 410 VDC | 49 VDC |
| 1758129277 | 56 Count | 358 Count | 0 Count | 410 VDC | 50 VDC |
| 1758125679 | 52 Count | 333 Count | 0 Count | 410 VDC | 219 VDC |
| 1758118481 | 44 Count | 262 Count | 0 Count | 410 VDC | 256 VDC |
| 1758114881 | 40 Count | 218 Count | 0 Count | 410 VDC | 255 VDC |
| 1758111285 | 36 Count | 179 Count | 0 Count | 411 VDC | 256 VDC |
| 1758107687 | 32 Count | 166 Count | 0 Count | 410 VDC | 255 VDC |
| 1758105888 | 30 Count | 160 Count | 0 Count | 410 VDC | 255 VDC |
| 1758104089 | 28 Count | 155 Count | 0 Count | 410 VDC | 255 VDC |
| 1758102290 | 26 Count | 149 Count | 0 Count | 410 VDC | 256 VDC |
| 1758100490 | 24 Count | 143 Count | 0 Count | 410 VDC | 255 VDC |
| 1758098691 | 22 Count | 137 Count | 0 Count | 409 VDC | 255 VDC |
| 1758096890 | 20 Count | 129 Count | 0 Count | 409 VDC | 255 VDC |
| 1758093291 | 16 Count | 112 Count | 0 Count | 409 VDC | 255 VDC |
| 1758091491 | 14 Count | 105 Count | 0 Count | 409 VDC | 218 VDC |
| 1758089693 | 12 Count | 79 Count | 0 Count | 409 VDC | 218 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 1, 0
V_Ext: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)