This is the latest recevied telemetry packets stored in our database for station/object IZ1RFL-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1762297201 | 0 Count | 301 Count | 0 Count | 4.2 VDC | 0 VDC |
| 1762295400 | 0 Count | 257 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1762291800 | 0 Count | 179 Count | 0 Count | 4.19 VDC | 0 VDC |
| 1762280088 | 0 Count | 924 Count | 0 Count | 4.17 VDC | 0 VDC |
| 1762279188 | 0 Count | 910 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1762275569 | 0 Count | 829 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1762272869 | 0 Count | 763 Count | 0 Count | 4.19 VDC | 0 VDC |
| 1762271969 | 0 Count | 749 Count | 0 Count | 4.19 VDC | 0 VDC |
| 1762271069 | 0 Count | 730 Count | 0 Count | 4.19 VDC | 0 VDC |
| 1762270169 | 0 Count | 707 Count | 0 Count | 4.17 VDC | 0 VDC |
| 1762269269 | 0 Count | 688 Count | 0 Count | 4.17 VDC | 0 VDC |
| 1762268369 | 0 Count | 675 Count | 0 Count | 4.21 VDC | 0 VDC |
| 1762267469 | 0 Count | 658 Count | 0 Count | 4.21 VDC | 0 VDC |
| 1762266568 | 0 Count | 628 Count | 0 Count | 4.19 VDC | 0 VDC |
| 1762265668 | 0 Count | 606 Count | 0 Count | 4.19 VDC | 0 VDC |
| 1762264768 | 0 Count | 582 Count | 0 Count | 4.17 VDC | 0 VDC |
| 1762263868 | 0 Count | 561 Count | 0 Count | 4.21 VDC | 0 VDC |
| 1762262968 | 0 Count | 544 Count | 0 Count | 4.19 VDC | 0 VDC |
| 1762261168 | 0 Count | 515 Count | 0 Count | 4.19 VDC | 0 VDC |
| 1762260268 | 0 Count | 507 Count | 0 Count | 4.19 VDC | 0 VDC |
| 1762259368 | 0 Count | 489 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1762258467 | 0 Count | 471 Count | 0 Count | 4.2 VDC | 0 VDC |
| 1762256667 | 0 Count | 420 Count | 0 Count | 4.19 VDC | 0 VDC |
| 1762255767 | 0 Count | 405 Count | 0 Count | 4.16 VDC | 0 VDC |
| 1762254867 | 0 Count | 394 Count | 0 Count | 4.19 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)