This is the latest recevied telemetry packets stored in our database for station/object SQ2ODE-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1762302688 | 657 Count | 557 Count | 0 Count | 0 VDC | 0 VDC |
| 1762299094 | 655 Count | 555 Count | 0 Count | 0 VDC | 0 VDC |
| 1762295493 | 653 Count | 553 Count | 0 Count | 0 VDC | 0 VDC |
| 1762270290 | 639 Count | 539 Count | 0 Count | 0 VDC | 0 VDC |
| 1762266688 | 637 Count | 537 Count | 0 Count | 0 VDC | 0 VDC |
| 1762263087 | 635 Count | 522 Count | 0 Count | 0 VDC | 0 VDC |
| 1762259486 | 633 Count | 509 Count | 0 Count | 0 VDC | 0 VDC |
| 1762257692 | 632 Count | 508 Count | 0 Count | 0 VDC | 0 VDC |
| 1762255891 | 631 Count | 507 Count | 0 Count | 0 VDC | 0 VDC |
| 1762254091 | 630 Count | 506 Count | 0 Count | 0 VDC | 0 VDC |
| 1762252290 | 629 Count | 505 Count | 0 Count | 0 VDC | 0 VDC |
| 1762248689 | 627 Count | 503 Count | 0 Count | 0 VDC | 0 VDC |
| 1762246888 | 626 Count | 502 Count | 0 Count | 0 VDC | 0 VDC |
| 1762245087 | 625 Count | 501 Count | 0 Count | 0 VDC | 0 VDC |
| 1762243287 | 624 Count | 498 Count | 0 Count | 0 VDC | 0 VDC |
| 1762241486 | 623 Count | 493 Count | 0 Count | 0 VDC | 0 VDC |
| 1762239686 | 622 Count | 473 Count | 0 Count | 0 VDC | 0 VDC |
| 1762237885 | 621 Count | 472 Count | 0 Count | 0 VDC | 0 VDC |
| 1762236091 | 620 Count | 471 Count | 0 Count | 0 VDC | 0 VDC |
| 1762234290 | 619 Count | 470 Count | 0 Count | 0 VDC | 0 VDC |
| 1762232490 | 618 Count | 466 Count | 0 Count | 0 VDC | 0 VDC |
| 1762230689 | 617 Count | 465 Count | 0 Count | 0 VDC | 0 VDC |
| 1762228889 | 616 Count | 464 Count | 0 Count | 0 VDC | 0 VDC |
| 1762227088 | 615 Count | 463 Count | 0 Count | 0 VDC | 0 VDC |
| 1762225287 | 614 Count | 462 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)