This is the latest recevied telemetry packets stored in our database for station/object SR2GKG-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
---|---|---|---|---|---|
1754276608 | 583 Count | 820 Count | 558 Count | 4.39 VDC | 0 VDC |
1754274808 | 557 Count | 780 Count | 533 Count | 4.38 VDC | 0 VDC |
1754273015 | 523 Count | 739 Count | 504 Count | 4.41 VDC | 0 VDC |
1754271214 | 495 Count | 697 Count | 477 Count | 4.42 VDC | 0 VDC |
1754269413 | 459 Count | 650 Count | 442 Count | 4.4 VDC | 0 VDC |
1754267613 | 429 Count | 603 Count | 413 Count | 4.4 VDC | 0 VDC |
1754244212 | 850 Count | 1092 Count | 823 Count | 4.4 VDC | 0 VDC |
1754240609 | 717 Count | 920 Count | 692 Count | 4.41 VDC | 0 VDC |
1754238808 | 679 Count | 859 Count | 655 Count | 4.42 VDC | 0 VDC |
1754237007 | 633 Count | 791 Count | 610 Count | 4.41 VDC | 0 VDC |
1754235207 | 587 Count | 728 Count | 565 Count | 4.39 VDC | 0 VDC |
1754233689 | 551 Count | 679 Count | 530 Count | 4.42 VDC | 0 VDC |
1754231605 | 496 Count | 596 Count | 476 Count | 4.41 VDC | 0 VDC |
1754229813 | 469 Count | 560 Count | 454 Count | 4.39 VDC | 0 VDC |
1754228012 | 427 Count | 509 Count | 413 Count | 4.4 VDC | 0 VDC |
1754226211 | 394 Count | 467 Count | 381 Count | 4.42 VDC | 0 VDC |
1754224411 | 361 Count | 423 Count | 349 Count | 4.41 VDC | 0 VDC |
1754222610 | 325 Count | 377 Count | 314 Count | 4.42 VDC | 0 VDC |
1754220809 | 244 Count | 286 Count | 234 Count | 4.38 VDC | 0 VDC |
1754219008 | 206 Count | 236 Count | 197 Count | 4.43 VDC | 0 VDC |
1754217208 | 166 Count | 189 Count | 158 Count | 4.41 VDC | 0 VDC |
1754215407 | 82 Count | 101 Count | 75 Count | 4.42 VDC | 0 VDC |
1754213606 | 50 Count | 63 Count | 44 Count | 4.41 VDC | 0 VDC |
1754211805 | 26 Count | 31 Count | 21 Count | 4.41 VDC | 0 VDC |
1754210004 | 4 Count | 1 Count | 0 Count | 4.39 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)