This is the latest recevied telemetry packets stored in our database for station/object SP2HCA-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1758188624 | 342 Count | 825 Count | 230 Count | 4.13 VDC | 0.14 VDC |
| 1758186821 | 339 Count | 817 Count | 228 Count | 4.13 VDC | 0.14 VDC |
| 1758185018 | 336 Count | 802 Count | 226 Count | 4.13 VDC | 0.14 VDC |
| 1758183215 | 333 Count | 791 Count | 224 Count | 4.21 VDC | 0.14 VDC |
| 1758181413 | 330 Count | 783 Count | 222 Count | 4.19 VDC | 0.14 VDC |
| 1758179643 | 323 Count | 776 Count | 220 Count | 4.18 VDC | 0.14 VDC |
| 1758174235 | 304 Count | 738 Count | 204 Count | 4.18 VDC | 0.14 VDC |
| 1758172432 | 301 Count | 731 Count | 202 Count | 4.16 VDC | 0.14 VDC |
| 1758170629 | 295 Count | 717 Count | 197 Count | 4.19 VDC | 0.14 VDC |
| 1758168826 | 292 Count | 709 Count | 195 Count | 4.19 VDC | 0.14 VDC |
| 1758167023 | 289 Count | 700 Count | 193 Count | 4.19 VDC | 0.14 VDC |
| 1758165220 | 286 Count | 692 Count | 191 Count | 4.14 VDC | 0.14 VDC |
| 1758161615 | 280 Count | 670 Count | 187 Count | 4.14 VDC | 0.14 VDC |
| 1758140014 | 241 Count | 566 Count | 164 Count | 4.12 VDC | 0.14 VDC |
| 1758136442 | 231 Count | 550 Count | 160 Count | 4.17 VDC | 0.14 VDC |
| 1758132836 | 225 Count | 535 Count | 156 Count | 4.21 VDC | 0.14 VDC |
| 1758125624 | 210 Count | 501 Count | 145 Count | 4.2 VDC | 0.14 VDC |
| 1758116610 | 187 Count | 414 Count | 127 Count | 4.17 VDC | 0.14 VDC |
| 1758114841 | 178 Count | 404 Count | 123 Count | 4.17 VDC | 0.14 VDC |
| 1758111235 | 161 Count | 370 Count | 108 Count | 4.19 VDC | 0.14 VDC |
| 1758109432 | 158 Count | 362 Count | 106 Count | 4.21 VDC | 0.14 VDC |
| 1758107629 | 155 Count | 354 Count | 104 Count | 4.15 VDC | 0.14 VDC |
| 1758105826 | 152 Count | 348 Count | 102 Count | 4.15 VDC | 0.14 VDC |
| 1758104023 | 150 Count | 342 Count | 101 Count | 4.19 VDC | 0.14 VDC |
| 1758102220 | 147 Count | 336 Count | 99 Count | 4.21 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)