This is the latest recevied telemetry packets stored in our database for station/object SQ8RZE-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1763144728 | 30 Count | 109 Count | 26 Count | 0 VDC | 0 VDC |
| 1763142019 | 13 Count | 51 Count | 12 Count | 0 VDC | 0 VDC |
| 1763140211 | 340 Count | 1009 Count | 268 Count | 0 VDC | 0 VDC |
| 1763139305 | 335 Count | 995 Count | 264 Count | 0 VDC | 0 VDC |
| 1763138407 | 332 Count | 970 Count | 262 Count | 0 VDC | 0 VDC |
| 1763137498 | 330 Count | 943 Count | 261 Count | 0 VDC | 0 VDC |
| 1763134011 | 307 Count | 850 Count | 246 Count | 0 VDC | 0 VDC |
| 1763133102 | 301 Count | 832 Count | 241 Count | 0 VDC | 0 VDC |
| 1763132196 | 297 Count | 811 Count | 238 Count | 0 VDC | 0 VDC |
| 1763131288 | 289 Count | 786 Count | 231 Count | 0 VDC | 0 VDC |
| 1763129478 | 268 Count | 744 Count | 212 Count | 0 VDC | 0 VDC |
| 1763127669 | 245 Count | 699 Count | 191 Count | 0 VDC | 0 VDC |
| 1763126763 | 237 Count | 674 Count | 184 Count | 0 VDC | 0 VDC |
| 1763125855 | 231 Count | 639 Count | 179 Count | 0 VDC | 0 VDC |
| 1763124949 | 228 Count | 615 Count | 177 Count | 0 VDC | 0 VDC |
| 1763124046 | 221 Count | 593 Count | 171 Count | 0 VDC | 0 VDC |
| 1763123144 | 218 Count | 581 Count | 169 Count | 0 VDC | 0 VDC |
| 1763122240 | 214 Count | 571 Count | 166 Count | 0 VDC | 0 VDC |
| 1763121337 | 209 Count | 564 Count | 162 Count | 0 VDC | 0 VDC |
| 1763118622 | 199 Count | 520 Count | 155 Count | 0 VDC | 0 VDC |
| 1763117713 | 195 Count | 506 Count | 152 Count | 0 VDC | 0 VDC |
| 1763116807 | 186 Count | 491 Count | 144 Count | 0 VDC | 0 VDC |
| 1763115905 | 181 Count | 479 Count | 140 Count | 0 VDC | 0 VDC |
| 1763115001 | 178 Count | 470 Count | 138 Count | 0 VDC | 0 VDC |
| 1763114090 | 173 Count | 457 Count | 134 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)