This is the latest recevied telemetry packets stored in our database for station/object F4IZM-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1783797444 | 8 Count | 36 Count | 6 Count | 0 VDC | 0 VDC |
| 1783793834 | 2 Count | 12 Count | 2 Count | 0 VDC | 0 VDC |
| 1783792029 | 213 Count | 1004 Count | 148 Count | 0 VDC | 0 VDC |
| 1783790224 | 210 Count | 993 Count | 146 Count | 0 VDC | 0 VDC |
| 1783777589 | 189 Count | 904 Count | 132 Count | 0 VDC | 0 VDC |
| 1783773979 | 183 Count | 881 Count | 128 Count | 0 VDC | 0 VDC |
| 1783772174 | 180 Count | 868 Count | 126 Count | 0 VDC | 0 VDC |
| 1783770369 | 177 Count | 856 Count | 124 Count | 0 VDC | 0 VDC |
| 1783764954 | 163 Count | 814 Count | 113 Count | 0 VDC | 0 VDC |
| 1783763150 | 160 Count | 801 Count | 111 Count | 0 VDC | 0 VDC |
| 1783761345 | 157 Count | 788 Count | 109 Count | 0 VDC | 0 VDC |
| 1783734524 | 153 Count | 777 Count | 107 Count | 0 VDC | 0 VDC |
| 1783732719 | 150 Count | 757 Count | 105 Count | 0 VDC | 0 VDC |
| 1783730914 | 146 Count | 741 Count | 102 Count | 0 VDC | 0 VDC |
| 1783729109 | 143 Count | 723 Count | 100 Count | 0 VDC | 0 VDC |
| 1783727305 | 140 Count | 708 Count | 98 Count | 0 VDC | 0 VDC |
| 1783707451 | 105 Count | 577 Count | 74 Count | 0 VDC | 0 VDC |
| 1783705646 | 102 Count | 565 Count | 72 Count | 0 VDC | 0 VDC |
| 1783696622 | 87 Count | 500 Count | 62 Count | 0 VDC | 0 VDC |
| 1783693012 | 81 Count | 473 Count | 58 Count | 0 VDC | 0 VDC |
| 1783682183 | 63 Count | 390 Count | 46 Count | 0 VDC | 0 VDC |
| 1783678573 | 57 Count | 360 Count | 42 Count | 0 VDC | 0 VDC |
| 1783676768 | 54 Count | 334 Count | 40 Count | 0 VDC | 0 VDC |
| 1783674963 | 51 Count | 313 Count | 38 Count | 0 VDC | 0 VDC |
| 1783671353 | 41 Count | 285 Count | 30 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)