This is the latest recevied telemetry packets stored in our database for station/object S51ZK-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1762276648 | 0 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762269460 | 129 Count | 931 Count | 117 Count | 0 VDC | 0 VDC |
| 1762262253 | 108 Count | 816 Count | 98 Count | 0 VDC | 0 VDC |
| 1762251464 | 79 Count | 572 Count | 72 Count | 0 VDC | 0 VDC |
| 1762247861 | 65 Count | 491 Count | 59 Count | 0 VDC | 0 VDC |
| 1762244258 | 52 Count | 429 Count | 47 Count | 0 VDC | 0 VDC |
| 1762240654 | 43 Count | 356 Count | 39 Count | 0 VDC | 0 VDC |
| 1762237051 | 38 Count | 298 Count | 35 Count | 0 VDC | 0 VDC |
| 1762233448 | 30 Count | 209 Count | 28 Count | 0 VDC | 0 VDC |
| 1762229862 | 19 Count | 141 Count | 18 Count | 0 VDC | 0 VDC |
| 1762226258 | 10 Count | 64 Count | 10 Count | 0 VDC | 0 VDC |
| 1762222655 | 188 Count | 1049 Count | 172 Count | 0 VDC | 0 VDC |
| 1762190245 | 92 Count | 446 Count | 85 Count | 0 VDC | 0 VDC |
| 1762186661 | 78 Count | 387 Count | 72 Count | 0 VDC | 0 VDC |
| 1762183058 | 64 Count | 336 Count | 59 Count | 0 VDC | 0 VDC |
| 1762179454 | 52 Count | 279 Count | 48 Count | 0 VDC | 0 VDC |
| 1762175851 | 41 Count | 226 Count | 38 Count | 0 VDC | 0 VDC |
| 1762172248 | 31 Count | 176 Count | 29 Count | 0 VDC | 0 VDC |
| 1762168648 | 21 Count | 131 Count | 20 Count | 0 VDC | 0 VDC |
| 1762165060 | 10 Count | 70 Count | 10 Count | 0 VDC | 0 VDC |
| 1762161457 | 199 Count | 1029 Count | 182 Count | 0 VDC | 0 VDC |
| 1762157853 | 188 Count | 944 Count | 172 Count | 0 VDC | 0 VDC |
| 1762154250 | 177 Count | 883 Count | 162 Count | 0 VDC | 0 VDC |
| 1762150647 | 167 Count | 815 Count | 153 Count | 0 VDC | 0 VDC |
| 1762147044 | 160 Count | 695 Count | 147 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)