This is the latest recevied telemetry packets stored in our database for station/object SP9DAT-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1746012941 | 231 Count | 398 Count | 149 Count | 0 VDC | 0 VDC |
| 1746012040 | 223 Count | 386 Count | 144 Count | 0 VDC | 0 VDC |
| 1746010238 | 214 Count | 372 Count | 140 Count | 0 VDC | 0 VDC |
| 1746009337 | 210 Count | 365 Count | 138 Count | 0 VDC | 0 VDC |
| 1746008436 | 203 Count | 357 Count | 133 Count | 0 VDC | 0 VDC |
| 1746007535 | 199 Count | 350 Count | 131 Count | 0 VDC | 0 VDC |
| 1746006635 | 194 Count | 341 Count | 129 Count | 0 VDC | 0 VDC |
| 1746005733 | 191 Count | 334 Count | 128 Count | 0 VDC | 0 VDC |
| 1746004832 | 186 Count | 324 Count | 126 Count | 0 VDC | 0 VDC |
| 1746003931 | 183 Count | 318 Count | 125 Count | 0 VDC | 0 VDC |
| 1746003030 | 176 Count | 303 Count | 121 Count | 0 VDC | 0 VDC |
| 1746002129 | 169 Count | 294 Count | 116 Count | 0 VDC | 0 VDC |
| 1746001228 | 163 Count | 281 Count | 113 Count | 0 VDC | 0 VDC |
| 1746000327 | 158 Count | 271 Count | 110 Count | 0 VDC | 0 VDC |
| 1745999426 | 146 Count | 255 Count | 101 Count | 0 VDC | 0 VDC |
| 1745998525 | 140 Count | 245 Count | 97 Count | 0 VDC | 0 VDC |
| 1745997624 | 132 Count | 232 Count | 92 Count | 0 VDC | 0 VDC |
| 1745996723 | 127 Count | 222 Count | 89 Count | 0 VDC | 0 VDC |
| 1745995822 | 115 Count | 204 Count | 79 Count | 0 VDC | 0 VDC |
| 1745994922 | 107 Count | 193 Count | 73 Count | 0 VDC | 0 VDC |
| 1745994021 | 99 Count | 178 Count | 67 Count | 0 VDC | 0 VDC |
| 1745993120 | 92 Count | 163 Count | 62 Count | 0 VDC | 0 VDC |
| 1745992219 | 84 Count | 147 Count | 56 Count | 0 VDC | 0 VDC |
| 1745991318 | 77 Count | 138 Count | 51 Count | 0 VDC | 0 VDC |
| 1745990417 | 68 Count | 126 Count | 45 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)